*PPG SigmaCover 640LT Non Slip Epoxy Paint
Please note, this product is now discontinued. See PPG Sigmacover 2 as a potential alternative.
PPG SigmaCover 640LT 2 Pack Non-Slip Epoxy Paint offers a fast drying solution and can be applied in low temperatures down to freezing. SigmaCover 640LT works similarly to SigmaCover 640NS and can be used to offer excellent adhesion to a wide range of existing coatings with non slip properties.
Best Uses
SigmaCover 640LT 2 Pack Non-Slip Epoxy has been specially manufactured as a professional coating, with a unique formula that can be used on bridges, tank exteriors, containers, oil tanks, and is commonly used in the London Underground. SigmaCover 640LT is ideal for chemical acid and fuel bunds.
Application
SigmaCover 640LT 2 Pack Non-Slip Epoxy is easy to apply using brush, roller or spray to produce a quality, self priming, semi gloss finish. SigmaCover 640LT has a theoretical coverage rate of 8.5m2 per litre and has an approximate drying time of 6 hours to touch at 10°C.
Surface and Environment
SigmaCover 640LT 2 Pack Non-Slip Epoxy Paint can be used in a variety of commercial, construction and industrial environments where chemical spillages, splashes and fumes from acids, alkalis, solvents and water can cause damage to the surface. SigmaCover 640LT works well to protect the surface from all of these things and can be used on steel and concrete substrates, as well as prepared damp surfaces.
Certificates and Approvals
- SigmaCover 640LT is London Underground Approved.
Features
- SigmaCover 640LT is a fast drying high solids, 2 pack epoxy coating which offers excellent adhesion to a wide range of existing coatings with low temperature curing down to 0°C.
- It offers exceptional corrosion protection in industrial and marine environments.
- Can be applied over mechanically cleaned steel and suitable prepared concrete, is compatible with prepared damp surfaces.
- Specially formulated as a high performance coating on bridges, tank exteriors, Bunds, containers, oil tanks etc.
- Good resistance to splash, spillage and fumes of acids, alkalis, solvents, fresh and salt water.
- SigmaCover 640LT can be overcoated with a wide range of top coats if required.
- Please call for further details.
Technical Info
| Components: | Two Component |
| Type: | High Solids Epoxy |
| Finish: | Semi-Gloss |
| Stock Colours: | White, Black |
| Tintable: | Yes.Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 114.0 g/kg |
| Volume Solids: | 85 +/- 2% |
| Suitable Substrates: | Carbon Steel, Concrete, Galvanized Steel, Stainless Steel, Non-Ferrous Metals |
| Application Method: | Brush, Roller, Airless Spray or Air Spray |
| Theoretical Coverage: | 8.5 m2/l |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | 100 - 200 microns |
| Induction Time: | None |
| Pot Life: | 2 hours at 20°C |
| Touch Dry: | 6 hours at 20°C |
| Overcoatable: | Minimum of 16 hours |
| Fully Cured: | 7 days at 20°C |
| Cleaner / Thinner: | See product data sheet |
| Shelf Life: | At least 36 months when stored cool and dry and unopened |
| Packaging: | Available in 4 Litres |