Highways Agency Item No.

Highways Agency Item No.

Promain supply the complete range of paints specified by the Highways Agency, which are commonly known as Item numbers, these are paints that have been tested and approved for the Highways Agency providing them with a quality controlled range of products from manufactures such as PPG Sigma (formerly known as Ameron), Amercoat, Mebon and Mebopro. Other manufacturers such as Leigh’s Paints who have now been acquired by Sherwin Williams, 3M, Hempel, Jotun, and Dacrylate Paints, also offer a range of coatings that fit the Highways Agency criteria.

  • Jotun Jotatop Pro
    A 2 pack acrylic coating, formulated as a topcoat in pre-qualified NORSOK systems and offshore environments.
    From £455.77
    (£546.92 Inc VAT)
  • Sherwin Williams Macropoxy M922 - Formerly Transgard TG123 Epigrip
    Epoxy with glass flakes for blast-cleaned and protected steel.
    From £153.58
    (£184.30 Inc VAT)
  • Sherwin Williams Acrolon C137V2 - Formerly Resistex & Transgard TG168
    A high quality, fast drying, acrylic urethane exterior gloss. Good colour retention. N9, M24, M34 and No.168. approved.
    From £114.32
    (£137.18 Inc VAT)
  • Sherwin Williams Macropoxy C123 - Formerly Leighs Epigrip C123
    High solids epoxy with glass flakes and anti-corrosives for steel protection.
    From £118.00
    (£141.60 Inc VAT)
  • Jotun Hardtop Optima
    A 2 pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail / Highways No. 185.
    From £188.04
    (£225.65 Inc VAT)
  • Hempel Hempadur 17940
    A two-component polyamide adduct-cured epoxy paint. BBA Cert. no. 08/H135-PS11. Highways Approved Item No.159. POA.
  • Axalta Bondon 115
    A two-pack epoxy, high solids, surface tolerant aluminium primer.
    From £76.50
    (£91.80 Inc VAT)
  • PPG SigmaCover 456 HS
    A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116
    From £93.60
    (£112.32 Inc VAT)
  • Sherwin Williams Transgard TG116 - Formerly Leighs
    Transgard TG116 two pack epoxy undercoat for abraded surfaces. Highways Item 116.
    From £116.31
    (£139.57 Inc VAT)
  • Hempel Hempadur MIO 47950
    An intermediate or finishing coat epoxy system for use in atmospheric exposures. Highways No.112
    From £63.40
    (£76.08 Inc VAT)
  • Sherwin Williams Transgard TG169 - Formerly Leighs
    Fast-drying urethane finish for long-term exterior colour retention.
    From £165.14
    (£198.17 Inc VAT)
  • Jotun Penguard Express B12
    A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.
    From £216.90
    (£260.28 Inc VAT)
  • Hempel Hempadur 1555 E
    A flexible coating with good abrasion and impact resistance. BBA Cert No. 08/H135-PS5. Highways Approved No.110
    From £61.64
    (£73.97 Inc VAT)
  • Sherwin Williams Transgard TG110 - Formerly Leighs
    A zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces. Highways Agency No.110
    From £115.36
    (£138.43 Inc VAT)
  • PPG SigmaDur 520
    A 2 pack high build semigloss aliphatic acrylic polyurethane finish, Highways Approved Item No.169.
    From £76.00
    (£91.20 Inc VAT)
  • Hempel Hempathane HS 55610
    A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved No.169.
    From £63.60
    (£76.32 Inc VAT)
  • Hempel Hempadur Mastic 45880
    A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
    From £52.69
    (£63.23 Inc VAT)
  • Hempel T-Wash 09940
    A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved No. 155
    From £33.38
    (£40.06 Inc VAT)
  • PPG Prep 88 Formerly Sigmarite 88
    Formerly Sigmarite 88. Water based cleaner or removing dirt, oil, etc. from floors, metal, cladding etc.
    From £58.90
    (£70.68 Inc VAT)
  • Jotun Hardtop XP
    A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
    From £80.48
    (£96.58 Inc VAT)
  • PPG PSX 700 Engineered Siloxane
    For steel from PPG Sigma, Ameron. Highways Approved Item No.185.
    From £307.50
    (£369.00 Inc VAT)
  • Sherwin Williams Transgard TG111V2 - Formerly Leighs
    A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.
    From £146.15
    (£175.38 Inc VAT)
  • Sherwin Williams Macropoxy M905 - Formerly Leighs Epigrip M905
    A winterfast hi build undercoat formulated for low temperature curing down to 0°C.
    From £81.50
    (£97.80 Inc VAT)
  • Hempel Hempadur ZP 47940
    A 2 pack polyamide adduct cured, high build epoxy paint. BBA Cert No. 08/H135-PS6. Highways Approved No.111
    From £253.31
    (£303.97 Inc VAT)
  • Sherwin Williams Macropoxy 267 - Formerly Leighs Epigrip C267V3
    A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
    From £95.14
    (£114.17 Inc VAT)
  • Hempel Hempadur Zinc 17360
    A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.
    From £241.07
    (£289.28 Inc VAT)
  • PPG SigmaDur 550
    Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).
    From £66.80
    (£80.16 Inc VAT)
  • PPG SigmaShield 460
    A two component high solids glassflake reinforced polyamine adduct epoxy coating Highways Approved Item No.123
    From £315.00
    (£378.00 Inc VAT)

Sika produce a single pack paint known as Sikacore Icosit 6630 although this polyurethane single coat paint is suitable to be be applied to not only weathered but new galvanised steel is used for street furniture. Sikacore 6630 does not have an Item number but is still used for Highways applications, all of these paint coatings are available from Promain. Promain have been supplying paints to contractors for over 25 years and have produced specifications for many councils for their Lighting Columns, Traffic Lights, Railings, Bridges, Street Signs as well as other street furniture fittings such as benches. 

The basic system implemented by the Highways Agency consists of degreasing then T Washing, only required if the substrate is new galvanised steel, then applying a zinc phosphate primer, an epoxy build coat followed by a polyurethane top coat in either a semi-gloss of gloss finish. There is a standard film thickness for each coat providing a total film thickness that will offer a life expectancy in excess of 10 years to first maintenance. For a longer lasting system there is a shop applied system based on an epoxy build coat followed by an Engineered Siloxane such as PPG PSX 700 offering a life expectancy of 25 years, this is the Highways Agency Item No.185.