SKU: ID23883
UN1263 (Class: 3, Pk Grp: III)
Tikkurila Temalac ML90
A rapid drying, high gloss topcoat for use on steel surfaces.
Available in 3 and 10 Litres. Tintable upon request.
3. Select a Qty
As low as:
£38.45
Inc VAT
£46.14
As low as:
Inc VAT
PRODUCT DETAILS
Tikkurila Temalac ML90 is a single component high gloss topcoat suitable for industrial finishing. This easy to apply product gives a high quality appearance and is ideal when there is a high demand for colour and gloss retention.
Best Uses
Temalac ML90 is for use on steel surfaces and is ideal on agricultural machinery, small tanks, haulage equipment and other machinery and equipment.
Application
Temalac ML90 can be applied using a "wet-on-wet" painting technique. Application is by either conventional or airless spray, or by brush.
All surfaces should be clean and dry before application. Remove all oil, grease, salt and dirt by appropriate means and repair any damage to the primer coat.
The best finish is obtained using a "wet-on-wet" technique, with 5-30 minutes evaporating pauses.
Suitable Primers
- Temaprime EE
- Temaprime EUR
- Temaprime GF
- Temaprime ML
- Fontecryl 10
TECHNICAL
| Components: | Single Pack |
| Type: | Solvent Based |
| Finish: | Full Gloss |
| Stock Colours: | White |
| Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 460 g/l |
| Volume Solids: | 45 ± 2 volume % |
| Suitable Substrates: | Metal |
| Application Method: | Brush, Airless Spray or Conventional Spray |
| Theoretical Coverage: | 11m/litre @ 20µm |
| Wet Film Thickness (WFT): | 90 µm |
| Dry Film Thickness (DFT): | 40 µm |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 5 hours at 23°C |
| Overcoatable: | 24 hours at 23°C |
| Cleaner / Thinner: | Thinners 1006 and 1050 |
| Shelf Life: | See tin for shelf life and storage information |
| Packaging: | Available in 3 and 10 Litres |
Customer Questions