Watco Bio-D Degreaser

Watco Bio-D Degreaser is an odourless, water based  heavy duty biodegradable cleaner, specially formulated to remove grease and oil from previously painted or bare concrete.

Best Uses

Bio-D is the ideal product for the preparation of dity, oily floors prior to painting. It can also be used as a maintenance degreaser, and is suitable for use both inside and outside.

Watco Bio-D will remove oil and grease contamination without softening or bleaching the existing coating, unlike most solvent based degreasers. This water based and virtually odourless degreaser is safe and easy to use in concentrate form for the removal of heavy contamination, or diluted with water for light-medium dirt deposits.

Application

Shake the container prior to application.

Floor preparation prior to painting: Floors with heavy contamination should be reasonably dry for Bio-D to be most effective. Simply brush in undiluted Watco Bio-D with a stiff broom, scrub and leave it for at least 15 minutes to allow it to penetrate and to lift the contamination out of the surface. Scrub the floor again with a stiff broom or a mechanical scrubber to loosen the dirt deposits. Finally, rinse with clean, cold water preferably whilst continuing to scrub. If further applications are required, the floor should be reasonably dry before repeating the process. 

Floors with light-medium contamination: As above but Bio-D may be diluted.

Floor maintenance: Bio-D can be diluted with up to 10 times water for cleaning existing painted or bare floor surfaces.

Machinery: Liberally coat oily and greasy parts using a soft brush. Leave for 5-15 minutes according to hardness of oil or grease, then rinse well with water. Always ensure you protect materials that might be damaged or must not become wet.